BodyMed Compressor Nebulizer System

• Compact medical device designed to deliver physician–prescribed medication to the bronchial lung passages.
• Creates a stream of air that travels through a clear tube to the medication cup where the liquid medication is aerosolized into a mist for easy inhalation.
• Use this nebulizer under the supervision of a licensed physician and/or a respiratory therapist.
• Includes the following components: 1 medication cup (0.2 oz.), 1 mouthpiece, 1 adult mask, 1 child mask, 1 air tube (5.2 ft.), 5 filters, and 1 power cord (4.6 ft.).
• Suitable for all ages and is intended for single patient use.
• Thermal protector will turn off the nebulizer device before it is overheated.
• 6.3” x 5.6” x 3.7”
• 60-month warranty.
• Not made with natural rubber latex.
• Use as intended.

PDAC APPROVED

• HCPCS Code: E0570 nebulizer with compressor
• HCPCS Code: A7003 for administration set (disposable)
• HCPCS Code: A7013 for felt filters

Product Specifications

Power

AC 120V/60Hz

Average Nebulization Rate

≥ 0.2 mL/min.

Compressor Pressure Range

30 psi–50 psi 206kPa–345kPa

BodyMed^® Compressor Nebulizer System

Compact Medical Device

The BodyMed^® Compressor Nebulizer System is intended for use in the treatment of upper and lower respiratory tract illnesses where aerosolized medication is required. Please consult a physician and/or pharmacist to determine if a prescription medication is approved for use with this nebulizer. This device is suitable for all ages and is intended for single patient use. The BodyMed^® Compressor Nebulizer System comes complete with 1 medication cup (0.2 oz.), 1 mouthpiece, 1 adult mask, 1 child mask, 1 air tube (5.2 ft.), 5 filters, 1 power cord (4.6 ft.).

What's Included

1 Medication Cup,.2 oz. (6 cc)

1 Mouthpiece

1 Adult Mask
 1 Child Mask

1 Air Tube, 5.2 ft. (1.6 m)

5 Filters

1 Power Cord, 4.6 ft. (1.4 m)

How to Use This Compressor Nebulizer

1. Set the nebulizer device on a flat, stable surface with the controls in reach.
2. Twist the top part of the medication cup counterclockwise to dissemble.
3. Fill the bottom part of the medication cup with the medication. Ensure that the cone is inside the bottom part.
4. Place the top part on the bottom and gently twist clockwise to reassemble the medication cup.
5. Attach one end of the air tube to the base of the medication cup.
6. Attach the other end of the air tube to the tube connector located on the front of the compressor.
7. Attach the mouthpiece or mask to the top section of the medication cup.
8. Place the mouthpiece in the patient’s mouth or secure the mask over the nose and mouth.
9. With the power switch turned “Off,” plug the power cord into an electrical outlet.
10. Press the power switch “On” to start treatment.
11. When finished, turn the nebulizer device off, and unplug it from the electrical outlet.